Current Promotions

Product Highlights High data rate, up to 48 Mbps Long range, up to 80 km/50 miles TDM and Ethernet over a single wireless link Available in various sub-6GHz frequencies OFDM technology enables operation in nLOS Available in PtP and MPtP architectures Full local and remote management capabilities WinLinkTM 1000 Carrier-Class Sub-6GHz Radio Systems Price & Performance Leadership in Wireless Broadband RADWIN’s WinLink™ 1000 family of Point-to-Point wireless broadband solutions deliver carrier-class performance at the most competitive price in the market. WinLink™ 1000 solutions pack legacy TDM and Ethernet services over the 2.3 - 2.7GHz and 4.9 - 6.020GHz spectrum bands, and comply with worldwide standards and regulations including FCC and ETSI.

Key Benefits • Industry proven solution; thousands of systems installed at leading carriers globally • Extremely simple to install and maintain • Available in license exempt requencies, eliminating regulatory overhead and delays • Significantly reduces CAPEX and OPEX WinLink™ 1000 is ideally suited to meet the connectivity needs of cellular operators, service providers, enterprises and private networks, providing high capacity connectivity of up to 48 Mbps at ranges of up to 80 km/50 miles. Available in multiple frequency bands and configurations, the cost effective solutions are extremely simple to install and maintain, and are typically up and running in less than an hour. RADWIN’s WinLink™ 1000 solutions can also be installed in a unique Multiple-Point-to-Point architecture; multiple units are deployed in one hub site location, from where they provide a dedicated high-capacity connection to each remote site. The Multiple-Point-to-Point concept builds on RADWIN’s unique Hub Site ynchronization (HSS) feature, which synchronizes the transmission of collocated WinLink™ 1000 radios thus dramatically reducing mutual linterference commonly experienced with collocated TDD radios. Typical Applications Backhaul WinLink™ 1000 systems power a range of backhaul applications, including: • Cellular backhaul • Backhaul to access points (for metro WiFi deployments) • Backhaul from points of presence (PoPs) of wireless ISPs to backbone network Broadband Access WinLink™ 1000 provides a broadband access solution, offering Ethernet and E1s/T1s services to end-users. Remote Sites Connectivity For enterprises and organizations with multiple sites, WinLink™ 1000 offers costeffective and transparent connectivity for LAN and PBX systems.

Regulation   Frequency Bands 2.300-2.400 GHz 2.400-2.4835 GHz 2.500-2.690 GHz 4.940-4.990 GHz 5.140-5.350 GHz 5.490-5.730 GHz 5.725-6.020 GHz Radio Regulations   FCC 47CFR part 15 subparts B&C and E, part 27 and part 90 IC RSS-210 ETSI EN 300 328 and EN 301 893 UK VNS 2107 Australia AS/NZS 4771 India WPC Environmental Regulations   Safety EN 60950, IEC 60950, UL 60950, CAN-CSA C22.2 60950 EMC EN 300 386, EN 301 489, EN 55022, EN 61000, EN 55024, AS/NZS CISPR 22, CAN/CSA-CEI/IEC CISPR 22-02, FCC 47CFR class B part 15 sub-part B Environmental IEC 60721 class 4M5 IP67

Connectivity solutions that can be deployed in minutes – a growing demand in today’s fast-paced world When a disaster strikes, whether small or large, one of the rst issues to address is reestablishing communicaions – and time is always a critical factor. The real challenge of a systematic recovery plan is access to infrastructure components. There are no guarantees that vendors of these critical components will have sucient stock to support the recovery eorts of every operator and agency. When Hurricane Katrina struck, RADWIN supplied its radios to the local telephone company to help rebuild the communications network. They were able to utilize the OFDM technology to establish connections in non-line-of-sight situations and get vital communications back on line. As a result of this experience, RADWIN learned how critically essential it was to have everything necessary to install the link right there, ready to deploy! RADWIN decided to create the Link-In-Case for all types of disasters. Everything necessary – 2 radios with integrated antennas, 2 indoor units with T1 connections plus Ethernet and 2 CAT5 cables with the correct terminations to connect the radios with the indoor units. All of these components are housed in a rugged, water-proof, light-weight case on wheels. The radios are precongured for installation and can be aligned in a matter of minutes, utilizing RADWIN’s unique audio alignment system – the radios “tell” you when they are aligned. Therefore, it really is fast and easy to install. Where can the Link-In-Case be utilized? Anywhere there is a need for communications -whether it’s ensuring public safety and saving lives after a storm, or putting in a temporary T1 to a cell tower to start revenues owing, or getting service to the new school for the well-being of the children, while the cable job is being worked. This is a solution that you will never regret having on hand – in case you need a Link.

Fiber Jumpers - Large Quantities – In Stock - Custom configurations available - 100% Tested with life time warranty - Telcordia GR-326 compliant

 

Contact | Site Map | Privacy Policy

©2006 TelWorx All rights reserved.